Secondary Coating Line – Fresh Light On A Important Point..

Fiber proof testers are designed to apply a set load to Optical Fiber Coloring Machine in order to evaluate the strength of the spliced Fiber. Our Fiber proof testers are available in both linear and rotary styles, for both proof and stress screening. Fiber proof testers are accessible for single mode, multimode, and polarization-maintaining fibers. Pick from devoted, standalone techniques or multi-purpose styles that are also competent at stripping, cleansing, cleaving, splicing, and/or recoating.

Fiber Recoaters with Proof Testers provide simple, integrated answers to recoat and test combination-spliced materials. The Fiber recoating process restores the buffer coating to a removed Fiber, offering much more flexibility compared to a heat-reduce safety sleeve, allowing it to be dealt with and coiled with no damage to the fusion-spliced area. The integrated linear or rotary Proof tester enables customers to instantly check a recoated Fiber using a pre-decided load and determine the long-term longevity of the Fiber. Because of the ability to recover a combination-spliced Fiber to near original problem, these techniques are best for applications like undersea optical Fiber cables, submarine communication wiring, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The process begins with the fusion-spliced part of Fiber becoming placed in the midst of the mold set up (see picture towards the right). Once set in position, inserts inside the Fiber blocks secure the spliced Fiber set up. Recoat materials is motivated in to the cavity then Ultra violet-cured. The recoated Fiber can then be tested by tugging onto it up to and including pre-decided weight.

Recoater and Mold Assembly Choices – Recoaters are available with either an automated or manual mold assembly. The automatic mold set up functions pneumatic control of the mold dishes and is also enhanced for top-volume production applications. Manual mold assemblies, on the other hand, use easy-to-open mold plates that offer much more versatility and are perfect for reduced-volume manufacturing or RAndD applications. A computerized or handbook volumetric dispensing pump and shot product is used to inject the recoat materials into the mold cavity.

The Optical Fiber Proof-Testing Machine comes regular having a mold assembly for Ø430 µm coated fibers; For your handbook recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up comes individually in order that customers can pick the right mold coating size for his or her program. Custom mold coating dimensions can be found approximately Ø900 µm. Pre-installing of the mold set up at the manufacturer is additionally available. Contact Technology Assistance for more information on custom molds or factory set up.

We provide each higher-index (Product # AB950200) and low-index (Item # PC373) recoat materials for use in these recoaters. Recoaters with manual injection pumping systems (Item #s PTR206B and PTR307B) are appropriate for both kinds of recoat materials; other recoaters are suitable for the top-directory material only. Our handbook recoaters with an automated injection system (Item #s PTR206 and PTR307) can be customized to work with both the reduced- and high-directory recoat materials; make sure you get in touch with Tech Assistance for additional information.

Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters come with an integrated linear Proof tester, that takes the Fiber up to a predetermined weight (20 N) then produces it. The linear Proof tester uses the identical Fiber keeping obstructs because the recoater and so the Fiber will not have to be relocated just before testing. The PTR307 and PTR307B Fiber Recoaters have an integrated rotary Proof tester, which can perform each Proof and tension assessments (?89 N). A single set of Proof check grips is included; replacement Proof check grips are available listed below in packages of 10. Each testing procedure is fully programmable through the included handset or tablet pc controller, allowing qyjflh user to select guidelines including the weight, the pace in which the stress is used, and also the hold time.

Inserts for Fiber Keeping Blocks – As well as the previously mentioned, we offer many different inserts to use inside the Fiber keeping obstructs from the recoaters in order to support a large range of FTTH Cable Production Line coating diameters. For recoaters with a rotary Proof tester, the inserts are appropriate for Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters having a linear Proof tester, the inserts include a range for Fiber films from Ø250 µm to Ø900 µm.

Leave a Reply

Your email address will not be published. Required fields are marked *